AGCO WINEEM4 SERVICE TOOL 2.9.0

What is AGCO WINEEM4 Service Tool?

AGCO WINEEM4 Service Tool is a specialized diagnostic and programming software developed by AGCO Corporation (a global manufacturer of agricultural equipment). It is specifically used for AGCO machines equipped with WINEEM4 (Wiring and Electronic Engine Management 4) systems, which control various electronic and engine functions in tractors and harvesters.

Functions of AGCO WINEEM4 Service Tool

1. Diagnostics

• Read and clear fault codes (DTCs).
• Monitor real-time data (engine speed, temperature, voltage, etc.).
• Perform system tests to check sensor and actuator functions.

2. Programming & Configuration

• Reprogram Electronic Control Units (ECUs).
• Update software/firmware on control modules.
• Configure machine-specific parameters (e.g. implement control settings, PTO settings).

3. Calibration

• Calibrate sensors (throttle, clutch, transmission, etc.).
• Perform learning procedures for new components or after repairs.

4. Service & Maintenance

• Reset service intervals and maintenance reminders.
• View detailed service information and logs.
• Generate service reports.

• NEW AGCO 4X4 CAN ADAPTER SUPPORT
• NEW RECENT PROFILES TO SHOW DATA FROM PAST 50 ENGINE HOURS
• NEW ASH LOAD ESTIMATION BASED ON ENGINE HOURS TO ‘SERVICE INFORMATION’ VIEW AND ECU REPLACEMENTE
• UPDATED ACTIVE ERROR DESCRIPTIONS
• UPDATED TROUBLESHOOT TO 2.0.16 ON ENGLISH LANGUAGE
• NEW INHIBIT REASONS FOR DPF REGENERATION

• STAGE 3B/4
• STAGE 5
• STAGE 0/TIER 0
• STAGE 2/TIER 2
• STAGE 3A/TIER 3
• STAGE 3B/TIER 4I
• STAGE 4/TIER 4F
• STAGE 4 – SINGLE TURBO
• STAGE 4 – SINGLE TURBO + EGR
• STAGE 4 – DUAL TURBO A
• STAGE 4 – DUAL TURBO B
• STAGE 4 – V12
• STAGE 5 – SINGLE TURBO
• STAGE 5 – SINGLE TURBO + EGR
• STAGE 5 – DUAL TURBO A
• STAGE 5 – DUAL TRUBO B